PRODUCTS

Clean Transfer System

Pre-Aligner

MAF-RA Series
MAF-RA Series For Compound Wafer,Glass WaferBackside VAC Chucking MAF-RAPN

This eage contact free unit aligns and centers both flat and notch type wafers at high speeds.

Features

###High speeds are enabled by the units ability to center wafers and perform angle alignment without a seperate chucking.

###Compatible with multiple wafers:200-300mm SEMI/JEIDA silicon wafers.

###Wafer size and nocth/flat are automatically recongnize,eliminating the need for host controller settings.

###Built-in controller for a compact design.

###Controllable through RS-232C or RS-485 serial interface or through photo I/O parallel communications.

###Configurable for compound semiconductor wafers and transparent glass wafers by utilizing CCD photo receiver for line sensor.

Specification

Wafer handling
φ200mm to φ300mm SEMI/JEIDA standard wafer.(Please inquire with regard to special wafers such as glass wafers.)
Alignment time
4.5seconds or less(When Processing φ300mm)
Alignment accuracy
XY:±0.1mm or less(3σ)θ:±0.1° or less(3σ)
Wafer off-center limit
±5mm or less(Wafer offset from chuck center)
Wafer holding method
Backside vacuum chuck
Wafer detection
Vacuum sensor with digital display
Communication
RS-232C,RS-485(Serial Interface)Photo I/O(Parallel interface)
Utility
Power:DC24V±10% 5A 1lineVacuum:-80kPa or less.1line
Mass
Main body:Appox.12kg
MAF-RB Series
MAF-RB Series For Compound Wafer,Glass WaferBackside VAC Chucking MAF-RBPN

This eage contact free unit aligns and centers both flat and notch type wafers at high speeds.

Features

###High speeds are enabled by the units ability to center wafers and perform angle alignment without a seperate chucking.

###Compatible with multiple wafers:100-200mm SEMI/JEIDA silicon wafers.

###Wafer size and nocth/flat are automatically recongnize,eliminating the need for host controller settings.

###Built-in controller for a compact design.

###Controllable through RS-232C or RS-485 serial interface or through photo I/O parallel communications.

###Configurable for compound semiconductor wafers and transparent glass wafers by utilizing CCD photo receiver for line sensor.

Specification

Wafer handling
φ100mm to φ200mm SEMI/JEIDA standard wafer.(Please inquire with regard to special wafers such as glass wafers.)
Alignment time
5.5seconds or less(When Processing φ200mm)
Alignment accuracy
XY:±0.1mm or less(3σ)θ:±0.1° or less(3σ)
Wafer off-center limit
±5mm or less(Wafer offset from chuck center)
Wafer holding method
Backside vacuum chuck
Wafer detection
Vacuum sensor with digital display
Communication
RS-232C,RS-485(Serial Interface)Photo I/O(Parallel interface)
Utility
Power:DC24V±10% 5A 1lineVacuum:-80kPa or less.1line
Mass
Main body:Appox.12kg
MAF-RC Series
MAF-RC Series For Compound Wafer,Glass WaferBackside VAC Chucking MAF-RC

This eage contact free unit aligns and centers both flat and notch type wafers at high speeds.

Features

###High speeds are enabled by the units ability to center wafers and perform angle alignment without a seperate chucking.

###Compatible with multiple wafers:150-300mm SEMI/JEIDA silicon wafers.

###Wafer size and nocth/flat are automatically recongnize,eliminating the need for host controller settings.

###Built-in controller for a compact design.

###Controllable through RS-232C or RS-485 serial interface or through photo I/O parallel communications.

###Configurable for compound semiconductor wafers and transparent glass wafers by utilizing CCD photo receiver for line sensor.

Specification

Wafer handling
φ150mm to φ300mm SEMI/JEIDA standard wafer.(Please inquire with regard to special wafers such as glass wafers.)
Alignment time
4.5seconds or less(When Processing φ300mm)
Alignment accuracy
XY:±0.1mm or less(3σ)θ:±0.1° or less(3σ)
Wafer off-center limit
±5mm or less(Wafer offset from chuck center)
Wafer holding method
Backside vacuum chuck
Wafer detection
Vacuum sensor with digital display
Communication
RS-232C,RS-485(Serial Interface)Photo I/O(Parallel interface)
Utility
Power:DC24V±10% 5A 1lineVacuum:-80kPa or less.1line
Mass
Main body:Appox.12kg
MAF-RM Series
MAF-RM Series For Compound Wafer,Glass WaferBackside VAC Chucking MAF-RMZN

This eage contact free unit aligns and centers both flat and notch type wafers at high speeds.

Features

###High speeds are enabled by the units ability to center wafers and perform angle alignment without a seperate chucking.

###Compatible with multiple wafers:50.8-100mm SEMI/JEIDA silicon wafers.

###Wafer size and nocth/flat are automatically recongnize,eliminating the need for host controller settings.

###Built-in controller for a compact design.

###Controllable through RS-232C or RS-485 serial interface or through photo I/O parallel communications.

###Configurable for compound semiconductor wafers and transparent glass wafers by utilizing CCD photo receiver for line sensor.

Specification

Wafer handling
φ50.8mm to φ100mm SEMI/JEIDA standard wafer.(Please inquire with regard to special wafers such as glass wafers.)
Alignment time
9.0seconds or less(When Processing φ100mm)
Alignment accuracy
XY:±0.2mm or less(3σ)θ:±0.2° or less(3σ)
Wafer off-center limit
±4mm or less(Wafer offset from chuck center)
Wafer holding method
Backside vacuum chuck
Wafer detection
Vacuum sensor with digital display
Communication
RS-232C,RS-485(Serial Interface)Photo I/O(Parallel interface)
Utility
Power:DC24V±10% 5A 1lineVacuum:-80kPa or less.1lineDry air:0.4MPa±50kPa 1line
Mass
Main body:Appox.12kg
MAF-RP Series
MAF-RP Series For Compound Wafer,Glass WaferBackside VAC Chucking MAF-RP

This eage contact free unit aligns and centers both flat and notch type wafers at high speeds.

Features

###High speeds are enabled by the units ability to center wafers and perform angle alignment without a seperate chucking.

###Compatible with multiple wafers:50.8-100mm SEMI/JEIDA silicon wafers.

###Wafer size and nocth/flat are automatically recongnize,eliminating the need for host controller settings.

###Built-in controller for a compact design.

###Configurable for compound semiconductor wafers and transparent glass wafers by utilizing CCD photo receiver for line sensor.

Specification

Wafer handling
φ50.8mm to φ100mm SEMI/JEIDA standard wafer.(Please inquire with regard to special wafers such as glass wafers.)
Alignment time
4.5seconds or less(When Processing φ100mm)
Alignment accuracy
XY:±0.2mm or less(3σ)θ:±0.2° or less(3σ)
Wafer off-center limit
±4mm or less(Wafer offset from chuck center)
Wafer holding method
Backside vacuum chuck
Wafer detection
Vacuum sensor with digital display
Communication
RS-232C,RS-485(Serial Interface)Photo I/O(Parallel interface)
Utility
Power:DC24V±10% 5A 1lineVacuum:-80kPa or less.1lineDry air:0.4MPa±50kPa 1line
Mass
Main body:Appox.14kg

Sales Div.Transfer Business Unit

+81-86-239-5117

+81-86-239-5118

TOPへ戻る